Bay Networks 5399 Manual page 245

lat_multicast_timer
lat_sys_location
lat_queue_max
latb_enable
defines the number of seconds that can elapse between service announcement
transmissions for the LAT protocol.
Type
RAC
Values
10 through 180 seconds
Default
30 seconds
Lists
RAC Only, LAT
supplies host location or identification information for the LAT protocol.
Type RAC
Values 0 to 32 characters
Default " "
Lists RAC Only, LAT
limits the number of HIC (Host Initiated Connection) requests that a RAC can
queue.
Type RAC
Values 1 to 255
Default 4
Lists RAC Only, LAT
allows a RAC to decode the LAT host data-b packets, which change
asynchronous port parameters. Refer to your LAT host documentation for details.
If you enter
requesting that flow control (XON/XOFF) be turned off, the RAC
turns off flow control and passes XON/XOFF characters to the host.
This scenario can adversely affect XON/XOFF and the terminal
cursor keys.
Type
Async
Values
enabled or disabled
Default
disabled
Lists
Async Ports, LAT
Managing Remote Access Concentrators Using Annex Manager
and the LAT host sends a data-b slot message
enabled
Appendix A RAC Parameters
A-55