Bay Networks 5399 Manual page 277

rupiahs
rip_default_route
rip_horizon
rip_next_hop
contains the password that controls authentication for RIP packets. Annex
Manager displays this parameter value as
as if you enter a null string.
unset
off and that all RIP packets are accepted.
Type
RAC
Value
16 characters
Default " " (null string)
Lists RAC Only, Routing
allows a RAC to advertise that it is the default router. You can enter a number
from 1 to 15 to indicate the hop count that is advertised. Entering
advertisement.
Type Interface
Values 0 through 15
Default 0
Lists Enet Port, Async Port, Routing
controls the split horizon algorithm for RIP. You can enter:
• to disable split horizon.
off
• to enable split horizon without poison. Split horizon
split
prevents a route from being advertised over the interface on
which it was learned.
• to enable split horizon with poison reverse. Poison
poison
reverse advertises the route over the interface on which it was
learned, but sets the hop count to 16.
Type
Interface
Values
off, split, poison
Default
poison
Lists
Enet Port, Async Port, Routing
specifies whether the next hop value is included in RIP version 2 advertisements.
Type
Interface
Values
never, needed, always
Default
needed
Lists
Enet Port, Async Port, Routing
Managing Remote Access Concentrators Using Annex Manager
Appendix A
if you enter the password here, or
set
indicates that authentication is turned
Unset
RAC Parameters
turns off the
0
A-87