Bay Networks 5399 Manual page 242

Appendix A RAC Parameters
input _ stop _ char
ip_forward_broadcast
ipencap_type
ipso_class
Managing Remote Access Concentrators Using Annex Manager
A-52
defines the control character sequence that stops input if
to .
stop/start
Type
Async
Values
+ any character
Ctrl
Default
+
(displays as ^S)
Ctrl S
Lists Async Port, Flow Control
allows a RAC to broadcast a packet to the SLIP or PPP interfaces. When a RAC
receives a packet sent to a broadcast address (except 0.0.0.0 and
255.255.255.255), it scans the interface list for SLIP or PPP and matches the
broadcast address against the remote address of the interface using a subnet or
net mask. If these addresses match, the RAC copies the packet to that interface.
If you enter , the RAC does not scan the interface list and does not copy
disabled
broadcast packets.
Type
RAC
Values
enabled or disabled
Default
disabled
Lists
RAC Only, Basic RAC
indicates whether the RAC LAN interface encapsulates IP packets in Ethernet
Version 2 format or IEEE 802.3 Data Link Layer format.
Type
RAC
Values
ethernet or ieee802
Default
ethernet
Lists
RAC Only, Basic RAC
specifies the U.S. Department of Defense basic IP Security Option (IPSO)
classification level included in TCP packets generated on RAC CLI, dedicated,
or adaptive asynchronous ports. The option is not added to locally generated
ICMP messages, RIP updates, or other system packets. The RAC does not check
incoming packets for the presence of the IPSO.
Type Async
Values none, secret, topsecret, confidential, unclassified
Default none
Lists Async Ports, Security
is set
input_flow_control