Bay Networks 5399 Manual page 253

modem_type
mop_login_password
mop_login_prompt
Type Async
Values cli, slave, adaptive, unused, slip, call, dedicated, ppp, arap,
auto-detect, auto-adapt, ndp, ipx, connect, rlogin, Telnet,
tn3270
Default cli
Lists
Async Port, AppleTalk, Basic Async Port, Dedicated Port,
IPX, Modem, PPP, SLIP, TN3270
specifies the type of modem attached to the asynchronous port. If you enter a
type that does not match the
was read most recently, the RAC logs a warning message. For more information
about the configuration file modem management, see Managing Remote Annex
Concentrators Using CLI Interfaces.
Type
Async
Values
0 to 16 characters
Default
n/a
Lists
Async Port, Modem
specifies the password for all ports using a VMS interface. This parameter works
only when
cli_interface
security reasons, Annex Manager displays values as
Type
RAC
Values
0 to 16 characters
Default
unset
Lists RAC Only, MOP
defines the prompt that appears for all ports using a VMS interface. This
parameter works only when
Type RAC
Values 0 to 16 characters
Default #
Lists RAC Only, MOP
Managing Remote Access Concentrators Using Annex Manager
field in the configuration file that
type_of_modem
is set to and
vci
vci_login_port_password
is set to
cli_interface
Appendix A RAC Parameters
is set to
enabled
or .
set unset
.
vci
. For
A-63