Bay Networks 5399 Manual page 255

multisession
name_server_1
name_server_2
nameserver_broadcast
allows terminals (i.e., VT420 and VT 330) supporting the DEC Terminal Device/
Session Management Protocol (TD/SMP) to display two active windows
simultaneously. Entering
on which the VCI command interface is configured.
Type
RAC
Values
enabled or disabled
Default disabled
Lists RAC Only, VCI_Interface
defines the type of name service used with the primary name server. This
parameter works only when you specify a host in
Type RAC
Values dns, ien_116, none
Default none
Lists RAC Only, Nameserver
defines the type of name service used with the secondary name server. The RAC
uses this service when the service specified in
parameter works only when you specify a host in
Type RAC
Values dns, ien_116, none
Default none
Lists
RAC Only, Nameserver
defines whether the RAC broadcasts a name server request if the preferred name
servers do not respond.
Type
RAC
Values
enabled or disabled
Default
disabled
Lists
RAC Only, Modem
Managing Remote Access Concentrators Using Annex Manager
here makes this feature available to all ports
enabled
pref_name1_addr
name_server_1
pref_name2_addr
Appendix A RAC Parameters
.
is not available. This
.
A-65