Bay Networks 5399 Manual page 267

ppp_ncp
ppp_password_remote
ppp_security_protocol
specifies the protocols that run on the interface. The RAC negotiates only for
those protocols that are specified here. You can select a single protocol, all
protocols, or a combination of two protocols from the following list:
• all
• ipcp
• atcp
• ipxcp
• ipcp-atcp
• ipcp-ipxcp
•
atcp-ipxcp
Type
Async
Values
all, ipcp, atcp, ipxcp, ipcp-atcp, ipcp-ipxcp, atcp-ipxcp
Default
ipcp
Lists
Async Port, PPP
defines a PPP port user password. For security reasons, Annex Manager displays
this value as or
set unset
Type
Async
Values
0 to 16 characters
Default
unset
Lists
Async Port, PPP, Security
defines the security check for the peer that the RAC requires before it starts the
network control protocol. If the RAC wants to use security and the peer refuses,
the RAC closes the link. You can enter:
• to use challenge-handshake protocol.
chap
• to use password authentication protocol.
pap
• to use both challenge-handshake protocol and
chap/pap
password authentication protocol.
• .
none
Managing Remote Access Concentrators Using Annex Manager
.
Appendix A RAC Parameters
A-77