Bay Networks 5399 Manual page 96

Chapter 4 Setting Up RACs
Managing Remote Access Concentrators Using Annex Manager
4-22
• displays the
Edit Modem
definitions can be viewed and changed in the
window. The fields in the
established on a 5399/8000 RAC or ISDN Primary Rate
Interface RAC, unless settings in the configuration file override
these values.
Interface Options Box
The box displays information in the
Interface Options
Assignment, Interface Protocol, AppleTalk, RLogin/Telnet
• The box displays address information for the ports you
Settings
selected:
• The
Remote Address
the remote end of the point-to-point (SLIP or PPP) link.
• The
Subnet Mask
subnet mask defines which portion of the IP address is the
network, subnet, and host. Entering an incorrect subnet mask
can cause routing problems.
• The
Address Assignment
from a host-based server. The
control the source of the address assignment.
• If you select the
file for the user name of the remote client and sets the
acp_dialup
remote address and other related values.
• If the file contains a matching user name and remote address in
the
acp_dialup
• If the file does not contain a matching user name, the RAC uses
the local value. If the remote address is set to 0.0.0.0, the RAC
negotiates for the address with the remote PPP client. The
connection is denied for a remote SLIP client.
• If you select the
to request the PPP dialup addresses.
window. Internal modem
Edit Modem
Edit Modem
field contains the IP address for the host at
field contains the RAC IP subnet mask. The
box allows a RAC to request an address
Address Assignment
button the RAC searches the
Security Server
file, the RAC uses that value.
button the RAC contacts a DHCP server
dhcp
Edit Modem
window apply to all calls
Settings, Address
, and boxes.
Dedicated
buttons