Chapter 3
Determining RAC Status
Managing Remote Access Concentrators Using Annex Manager
3-4
•
Activates (min/tot)
during the last minute (
processes activated since the RAC last booted (
Mbufs Box
The
(memory buffer) box provides information about the number
Mbufs
and use of memory buffers in the RAC.
•
indicates the number of memory buffers allocated by the
Total
RAC kernel.
•
provides the number of currently available memory
Free
buffers.
•
shows the smallest number of memory buffers that is
Min Free
available since the RAC was booted.
•
indicates the number of times a process was denied a
Denied
memory buffer because the buffer was not available.
Memory Box
The
box provides statistics about the memory of a RAC:
Memory
•
shows the total memory measured in bytes.
Total
•
indicates the amount of currently available memory.
Free
•
provides the lowest amount of free memory that is
Min Free
available since the RAC was booted.
•
indicates the amount of memory that was available
Avail
immediately after the RAC was booted.
There may be a problem with RAC software if:
•
shows a number other than zero.
Denied
•
displays zero or its value slowly decreases over
Min Free
time.
If you encounter these circumstances, contact Bay Networks
technical support.
supplies the number of processes activated
), followed by the number of
min
).
tot