Bay Networks 5399 Manual page 194

Appendix A RAC Parameters
anxt1ChanSigProto
anxt1ds1LineBuildout
anxt1Dsx1LineType
anxt1SwitchType
Managing Remote Access Concentrators Using Annex Manager
A-4
indicates the inbound and outbound signalling protocols supported by each DS0
T1 channel.
Type
T1 DS0
Values
wink_in, wink_out, wink_bi, loop_in, loop_out, loop_bi,
ground_in, ground_out, ground_bi, immediate_in,
immediate_out, immediate_bi
Default loop_bi
Lists DS0 Channel, T1_DS0
contains the cable loss measurement, in decibels, between the last T1 signal
regenerator and your location. This measurement is supplied by the telephone
company at installation. You should adjust your buildout based on this
measurement.
Type WAN Module
Values 0_db, 7.5_db, 15_db, 22.5_db
Default 0_db
Lists DS1 Line, PRI_Line, T1_DS1
indicates the variety of DS1line implementing this circuit. The type of circuit
affects the number of bits per second that the circuit can carry, as well as the
usage and error statistics.
Type WAN Module
Values
ESF, D4, DDF, MFF_CRC4, MFF_CRC4-G706
Default
ESF
Lists
DS1 Line, PRI_Line, T1_DS1
selects the switch type compatible with the PRI provider.
Type
WAN Module
Values
att5ESS, ni2, dms100, at9, ets, au1, kr2, ntt, ets-ncrc4,
us_t1, hk_t1, tw_t1, gen_e1, at4, br_e1, ko_e1, sweip7,
default, other.
Default
att5ESS
Lists
T1 Line, PRI_Line, T1_DS1