Bay Networks 5399 Manual page 298

Appendix B Configuring and Editing Scripts
Managing Remote Access Concentrators Using Annex Manager
B-2
and
View Script Execute Script
• contains RAC port and AppleTalk parameters.
AppleTalk
• contains basic RAC parameters. If you want to use
Basic_Annex
parameters marked with the comment symbol (#), you should
copy the script file, remove the symbol, and enter your own
site-specific defaults, since factory default values may not be
appropriate.
•
Basic_Async_Port
•
Cmd_Line_Editing
If you use framed protocols (PPP, IPX, etc.), you may want to
leave these parameters at their default settings.
•
Dedicated_Port
mode.
• contains port modem configuration parameters.
Modem
•
Modem_Internal
for the CSMIM-MODMIM product and other products with
internal modems.
• contains nameserver parameters.
Nameserver
• contains port parameters for PPP.
PPP
• contains port parameters for a parallel printer. Some
Printer_Port
RACs do not have parallel printer ports.
• contains RAC and port parameters for routing.
Routing
• contains RAC and port parameters for SLIP.
SLIP
• contains RAC and port security parameters.
Security
• contains RAC syslog parameters.
SysLog
• contains TMux protocol parameters.
TMux
• contains port parameters for tn3270.
TN3270
• contains RAC timeserver parameters.
Time_of_Day
• contains the DecServer user interface parameters of
VCIInterface
the port. If you do not use the DecServer interface, you should
leave these parameters at their default settings.
• contains virtual CLI parameters.
Virtual_CLI
provide the following pre-defined scripts:
contains basic asynchronous port parameters.
contains the terminal port editing parameters.
contains port parameters for dedicated port
contains port modem configuration parameters