Bay Networks 5399 Manual page 115

• If any of the values set for individual ports or channels using
other methods (
consecutive, this field and the
blank.
• If you change the
address you entered is assigned to the first port or channel of
the Annex you selected in the
or channels are then assigned IP addresses numbered
consecutively after the first address (if you enter 0.0.0.0, all IP
addresses in the range are assigned this value). For 5399
devices, IP addresses are assigned consecutively beginning
with the first channel of the first WAN Module and ending with
the last channel of the second WAN Module.
PPP Interface Protocol Box
The
PPP Interface Protocol
negotiates. You can select a single button or any combination of buttons:
• - the AppleTalk Control Protocol
atcp
• - the Internet Protocol Control Protocol
ipcp
• - the Internet Packet Exchange Control Protocol
ipxcp
Compression Box
If you want ccp compression for the selected RACs, select
compression is turned off.
Multilink PPP (MMP) Box
Multisystem Multilink PPP (MMP) is a superset of Multilink PPP. It
allows MP links for a telco hunt group to terminate on multiple RACs.
The RACs are combined together in an MMP group to use all of the
incoming channels in the group, increasing the potential bandwidth of an
MP bundle. The RACs support MMP for incoming calls only.
MMP is available only on ISDN-based products: 6300, 5393, 5399, 8000.
Managing Remote Access Concentrators Using Annex Manager
, , or Customized mode) are non-
admin na
Last Remote Address
First Remote Address
window. Subsequent ports
Main
box lists the control protocols for which the RAC
Chapter 4 Setting Up RACs
field are
and click , the IP
Apply
. Otherwise
ccp
4-41