Bay Networks 5399 Manual page 95

Modem Box
The box indicates the kind of modem attached to the ports you
Modem
selected and provides access to the
The first button in this box specifies the type of modem attached to the
ports you selected. You can display a list that includes all modems defined
in the configuration file and
This list displays names from the RAC configuration file followed by
names in any
include
an file, Annex Manager copies the definition, places the edited
include
version in the RAC configuration file, and displays the name from this file.
You cannot configure modem information if you select multiple RACs
that do not use the same configuration file on the same host. (The
configuration file does not have to reside on the same host as Annex
Manager.) In addition, you cannot configure modem information if you
select one or more RACs where the preferred boot host is different from
the actual boot host.
The modem name that displays when the window first appears depends
on your port selections:
• If you selected one port, or multiple ports that use the same
modem, this field contains the current modem name.
• If you selected ports that use different modems, this field is
blank. If you continue to use this window and do not enter a
name here, Annex Manager will not change modem values
when you click
• If the modem name is not set for the ports you selected,
<undefined>
• If the ports you selected use a modem that does not appear in
the list, Annex Manager adds the name to this list, displays a
warning window, and creates a default modem definition in the
configuration file. Click
default definitions.
Managing Remote Access Concentrators Using Annex Manager
Edit Modem
files for the RACs you selected.
include
file. If you edit a modem definition that originates in
.
Apply
appears.
Edit Modem
Chapter 4 Setting Up RACs
window.
to display and change this
4-21