Bay Networks 5399 Manual page 193

allow_compression
anxpNetRemoteAddress
anxt1ChanIpAddr
anxt1ChanRing
allows a RAC to use TCP/IP header compression for SLIP or PPP modes. Header
compression occurs only when the other side of the serial link initiates
compression.
Type
Async
Values
enabled or disabled
Default
disabled
Lists Async Port, PPP, SLIP
the Internet address for the host at the remote end of the point-to-point (SLIP,
PPP) link.
Type Async
Values IP address
Default 0.0.0.0
Lists Async Port, PPP, SLIP
returns the IP address associated with the B channel. When needed, this IP
address is used for calls over the B channel.
Type RAC
Values IP address
Default 0.0.0.0
Lists DS0 Channel, Channel
specifies if RAC should provide the audible ring to the central office on incoming
calls.
Type RAC
Values enabled or disabled
Default
disabled
Lists
DS0 Channel, T1_DS0
Managing Remote Access Concentrators Using Annex Manager
Appendix A RAC Parameters
A-3