Bay Networks 5399 Manual page 236

Appendix A RAC Parameters
dtr_signal
echo
enable_security
Managing Remote Access Concentrators Using Annex Manager
A-46
controls the DTR (Data Terminal Ready) signal for the port. Entering a value for
an idle port causes an error condition.
I f you change this value and then reset a port or reboot a RAC, this
parameter returns to its original default values. Therefore, you must
choose
Cancel
process and to use the parameter value you entered.
Type
Async
Values
unknown, high, low
Default
unknown
Lists
Async Port
directs a RAC to echo all characters as a user types. This parameter applies only
to the CLI level.
Type
Async
Values enabled or disabled
Default disabled
Lists Async Port, Command Line Editing
allows you to activate the security system.
Type RAC
Values enabled or disabled
Default disabled
Lists RAC Only, AppleTalk, IPX, PPP, SLIP, Security,
Virtual CLI
in the window to prevent the reset
Reset Parameters