Bay Networks 5399 Manual page 80

Chapter 4 Setting Up RACs
Managing Remote Access Concentrators Using Annex Manager
4-6
•
Load Sequence
order in which they are used for a down-line load or an up-line
dump. You can list more than one interface by using commas to
separate interface names. You can enter:
– to specify a local area network.
net
–
sl + port number
and a port number, you must enter an address in the
slip_load_dump_host
– to instruct a RAC to boot its image from the Flash ROMs.
self
Since the RAC cannot dump back to itself, you should include
a secondary interface here by entering
number.
• contains the image file name loaded by default when
Boot Image
the RAC is booted. This name can use up to 100 characters.
• defines the name of the configuration file maintained
Config File
on the boot host. The RAC uses this file for information on
gateways, rotaries, macros, and services. It must reside in the
/usr/spool/erpcd/bfs
Logging Box
Log messages at and above
You can choose:
• to log hardware failures.
emergency
• to log all RAC reboots.
alert
• to log configuration and initialization problems such as
critical
configuration file format errors or lack of memory.
• to log all line initialization errors.
error
• to log minor problems.
warning
• to log time server queries and information about
notice
responses.
• to start and end CLI sessions and RAC jobs created by
info
, ,
rlogin telnet connect
• to start and end any RAC process.
debug
specifies available network interfaces and the
(e.g., ) to specify a SLIP line. If you enter
sl2
parameter.
directory.
determines the priority levels that the RAC logs.
, and commands.
ping. tap
sl
or
self,net self,sl+port