Bay Networks 5399 Manual page 241

input _ flow _ control
input_is_activity
input _ start _ char
specifies the method of flow control for input received from a device connected
to a serial port. You can enter:
• to disable flow control.
none
• to designate flow control by recognizing xon and xoff
start/stop
characters.
• to indicate that flow control is delegated to a lower level
eia
(e.g., a parallel port).
Type
Async
Values
none, start/stop, eia
Default
none
Lists Async Port, Printer Port, Flow Control, Modem
defines activity as input. If you choose
when it receives input at the port.
Type Async
Values enabled or disabled
Default enabled
Lists Async Port, Dedicated Port, Idle Timer, Modem
defines the control character sequence that restarts input if
set to .
start/stop
Type Async
Value
+ any character
Ctrl
Default
+
Ctrl Q
Lists
Async Port, Flow Control
Managing Remote Access Concentrators Using Annex Manager
, the RAC sets the inactivity timer
enabled
(displays as ^Q)
Appendix A RAC Parameters
input_flow_control
is
A-51