Bay Networks 5399 Manual page 202

Appendix A RAC Parameters
CallDef_char_erase
CallDef_cli_imask7
CallDef_cli_inactivity
Managing Remote Access Concentrators Using Annex Manager
A-12
allows a RAC or an ISDN Primary Rate RAC using CLI to display the character
erase for a video terminal. When you choose
as if it was erased. If you choose
the erase characters for a hard-copy terminal. It displays a backslash (\), one or
more deleted characters, and a slash (/). For example, typing
displays as .
g asdf\fd/g
Type
RAC
Values
enabled or disabled
Default
enabled
Lists
RAC Only, Cmd Line Editing, Call Defaults
allows a RAC or an ISDN Primary Rate RAC to mask CLI input to seven bits.
If you choose , the ISDN Primary Rate RAC expects eight-bit ASCII
disabled
input. You should not choose
bit characters.
Type
RAC
Values
enabled or disabled
Default
disabled
Lists RAC Only, Basic Async Port, Call Defaults, Modem,
Modem Internal
specifies the number of minutes the ISDN Primary Rate RAC remains idle before
disconnecting a CLI session. Entering
the ISDN Primary Rate RAC to disconnect as soon as it exits from its last job.
Unlike
CallDef_inactivity_timer
active jobs.
Type RAC
Values 0 to 255 minutes
Default 0 minutes
Lists RAC Only, Call Defaults, Idle Time, Modem, Modem
Internal
enabled
, the ISDN Primary Rate RAC echoes
disabled
unless the terminal can transmit only seven-
enabled
disables the timer; entering
0
, this timer does not disconnect a CLI session with
, a deleted character looks
asdf
Delete Delete
causes
255