Bay Networks 5399 Manual page 276

Appendix A RAC Parameters
retrans_limit
rip_accept
rip_advertise
rip_auth
Managing Remote Access Concentrators Using Annex Manager
A-86
indicates the number of times a RAC retransmits a packet before it notifies a user
about a network failure. This parameter works only for the LAT protocol.
Type
RAC
Values
4 to 120
Default
8
Lists
RAC Only, LAT
defines the networks for which the RAC accepts advertised routes. You can enter
, , or a list of one to eight IP addresses in decimal format, preceded by
all none
or .
include exclude
Type Interface
Values all, none, or one to eight IP addresses preceded by include
or exclude
Default n/a
Lists Enet Port, Async Port, Routing
defines the networks for which the RAC advertises routes. You can enter
or a list of one to eight IP addresses in decimal format, preceded by
.
exclude
Type Interface
Values all, none, or one to eight IP addresses preceded by include
or exclude
Default
all
Lists
Enet Port, Async Port, Routing
contains the password that controls authentication for RIP 2 packets.
Type
RAC
Value
0 to 16 characters
Default
" " (null string)
Lists
RAC Only, Routing
, ,
all none
or
include