Bay Networks 5399 Manual page 228

Appendix A RAC Parameters
cli_imask7
cli_inactivity
cli_interface
Managing Remote Access Concentrators Using Annex Manager
A-38
allows a RAC to mask CLI input to seven bits. If you choose
expects eight-bit ASCII input. You should not choose
attached to the port can transmit only seven-bit characters.
Type
Async
Values
enabled or disabled
Default
disabled
Lists Async Port, Basic Async Port, Modem, Modem Internal
specifies the amount of time in minutes that the RAC remains idle before
disconnecting a CLI session from a port. Entering
causes the RAC to disconnect as soon as it exits from its last job. Unlike
255
, this timer does not disconnect a CLI session with active jobs.
inactivity_timer
Type Async
Values 0 to 255 minutes
Default 0 minutes
Lists Async Port, Idle Time, Modem, Modem Internal
allows you to control the prompt that appears for VMS or UNIX environments.
If you enter , this parameter provides a standard UNIX interface, with prompts
uci
defined by the
cli_prompt
VMS interface includes the
Type Async
Values
vci or uci
Default
uci
Lists
Async Port
and parameters. If you enter
prompt
prompt followed by the
Local>
, the RAC
disabled
unless the terminal
enabled
disables the timer; entering
0
, the standard
vci
prompt.
Username>