Bay Networks 5399 Manual page 99

• The
Remote Username
RAC identifies itself when the remote PPP peer asks for
authentication. This name can contain up to 15 characters.
• The
Remote Password
RAC uses when the remote PPP peer requests authentication.
For security reasons, Annex Manager displays this value as set
or unset. This password can contain up to 15 characters.
Time Box
The box defines activity on the ports you selected and controls
Time
inactivity timers.
• The
CLI Inactivity Timer
that the RAC remains idle before disconnecting a CLI session
from a port. Entering zero disables the timer; entering 255
causes the RAC to disconnect as soon as it exits from its last
job. You can enter any number of minutes up to 255. Unlike the
port inactivity timer, this timer does not disconnect a CLI
session with active jobs.
• The
Port Inactivity Timer
that a port can remain inactive. If the timer expires, the RAC
terminates all sessions and resets the port. Use the
and
Activity
the port or output from the port. If you do not use these buttons
the timer runs independent of activity. You can enter any
number of minutes up to 255 minutes.
• The
Input Is Activity
this button the RAC sets the inactivity timer when it receives
input at the port.
• The
Output Is Activity
click this button the RAC sets the inactivity timer when it sends
output from the port.
LAT Box
The box defines group codes.
LAT
Managing Remote Access Concentrators Using Annex Manager
field contains the user name by which the
field defines the user's password that the
specifies the amount of time in minutes
field specifies the number of minutes
buttons to define activity as input to
Output Is Activity
button defines activity as input. If you click
button defines activity as output. If you
Chapter 4 Setting Up RACs
Input is
4-25