Bay Networks 5399 Manual page 278

Appendix A RAC Parameters
rip_recv_version
rip_routers
rip_send_version
rip_sub_accept
Managing Remote Access Concentrators Using Annex Manager
A-88
controls the RIP versions that a RAC accepts. You can enter:
• to accept version 1 packets only.
1
• to accept version 2 packets only.
2
• to accept version 1 and 2 packets.
both
Type
Interface
Values
1, 2, both
Default
both
Lists
Enet Port, Async Port, Routing
lets you force RIP to send periodic updates to a router list instead of broadcasting
updates. You can enter the IP addresses of one to eight directly reachable routers,
or you can enter to restore broadcasting. The RAC ignores any address that
all
is not on an attached subnet.
Type
RAC
Values
IP address, all
Default
all
Lists RAC Only, Routing
controls the RIP versions that a RAC sends over IP interfaces. You can choose:
• to send version 1 packets to the broadcast address.
rip-1
• to send version 2 packets to the RIP multicast address.
rip-2
• to send version 2 packets to the broadcast address
compatibility
Type
Interface
Values
1, 2, compatibility
Default
compatibility
Lists Enet Port, Async Port, Routing
controls whether subnet routes are accepted over the SLIP, PPP, and Ethernet
interfaces. You can enter
them.
Type Interface
Values enabled or disabled
Default enabled
Lists Enet Port, Async Port, Routing
to accept subnet routes or
enabled
.
to reject
disabled