Bay Networks 5399 Manual page 156

Chapter 7 Configuring RAC Parameters
Managing Remote Access Concentrators Using Annex Manager
7-8
8. To save your output, click Save Output .
displays the standard
Save Output
includes the default text directory. Enter a file name in the
field and click
Selection
window output box or click
Show Output Box
The window output box lists parameter names and values. The
Show
output box always includes:
• A message informing you that you may need to enter port or
channel information when you first use
• A separate section for each RAC you selected. In
Figure 7-4, a line of asterisks separates information about two
RACs.
• All parameters included in a group or all parameters you
selected.
– Parameters in groups display in the order in which they appear in
the group. If you choose a parameter that requires port or channel
information and you enter more than one port or channel number,
the
Show Output
channel.
– Parameters you select from the parameter lists appear in
alphabetical order.
Entering Port and Channel Information
The parameters you choose in the
need to enter port or channel information when viewing parameter values.
If you select parameters that require this information, you can select a
port or channel type and enter port or channel numbers in fields located
below the
Show Output
To select a port or channel type and enter port or channel numbers:
1. Click and hold
The menu displays
DS0 Channel(s)
File Selection
to store the contents of the
OK
to return to the
Cancel
box displays a separate line for each port or
window determine whether you
Main
box.
.
Async Ports
,
Async Port(s) Printer Port(s), Enet Port(s)
and .
WAN Module #
window, which
Show
window.
Show
.
Show