Bay Networks 5399 Manual page 264

Appendix A RAC Parameters
port_multisession
port_password
Managing Remote Access Concentrators Using Annex Manager
A-74
Type Async
Values none, dialinautobaud, dialin, dialinoutautobaud, dialinout,
dialout, autodetect, autoadapt, ipx
Default none
Lists Async Port, Modem, Modem Internal
allows you to select ports that display two active windows. You can use this
parameter only for ports on which the VCI command interface is configured.
To use the multisession feature, you must:
• Have a valid LAT key.
• Enter
• Enter
• Reset a RAC if you change values for the multisession
parameters.
Type Async
Values enabled or disabled
Default disabled
Lists VCI_Interface
defines a port password for local password protection. You can use this password
as a back-up for host-based security if the security servers do not respond, or as
an additional line of security after you enter a username and password. For
security reasons, Annex Manager displays this value as
If you use SecurID, set
Type
Async
Values
0 to 15 characters
Default
unset
Lists
Async Port, Modem, Modem Internal
for the
enabled
multisession
for the
enabled
multisession_port
to a null string (" ").
port_password
parameter.
parameter.
or .
set unset