Bay Networks 5399 Manual page 114

Chapter 4 Setting Up RACs
Managing Remote Access Concentrators Using Annex Manager
4-40
Address Assignment Box
Address assignment buttons control the source of the address assignment.
•
Security server
name of the remote client and sets the remote address and other
related values.
• If the file contains a matching user name and remote address
in the
acp_dialup
• If the file does not contain a matching user name, the RAC
uses the local value - the value from the RAC.
• If the remote address is set to 0.0.0.0 the RAC negotiates
for the address with the remote PPP client. The connection
is denied for a remote SLIP client.
• - the RAC contacts DHCP server to request the PPP dialup
dchp
addresses.
• - the RAC uses the values from the
Local
fields.
Subnet
Remote Address Box
The box allows you to assign consecutive remote addresses
Remote Address
to RAC ports or B-channels for SLIP or PPP connections.You can set up
remote addressing from the
5393/6300, 5399, and 8000. For other devices use the
window. This window is described on page 4-43.
The window uses the
Remote Address
fields to enter and display information. The
displays the last remote address; you cannot enter text here.
•
First Remote Address
range of ports or channels for the selected Annex. If this field
displays
0.0.0.0,
are 0.0.0.0
.
- RAC searches the acp_dialup file for the user
file, the RAC uses that value.
window only for these devices:
PPP Dial Access
First Remote Address
assigns the first IP address of the entire
all addresses in the range of ports or channels
and
Remote Address
Remote Addressing
and
Subnet Mask
field
Last Remote Address