Bay Networks 5399 Manual page 203

CallDef_cli_interface
CallDef_cli_security
CallDef_connect_
security
CallDef_dedicated_
arguments
allows you to control the prompt that appears for VMS or UNIX environments.
If you enter , this parameter provides a standard UNIX interface, with prompts
uci
defined by the
CallDef_prompt
interface includes the
Type
RAC
Values
vci or uci
Default uci
Lists RAC Only, Call Defaults
enables user authentication by the host-based ACP server for all CLI connections.
If you choose
disabled
mechanism other than the administrative password for CLI connections.
Type RAC
Values enabled or disabled
Default disabled
Lists RAC Only, Call Defaults, Security
activates the host-based security policy for access from CLI to the network. If
you choose , the user must be authorized via the host-based ACP security
enabled
server to connect to a network host. The security policy in the security server
scans the
/etc/acp_restrict
Primary Rate RAC.
Type
RAC
Values
enabled or disabled
Default
disabled
Lists
RAC Only, Call Defaults, Modem, Modem Internal,
Security
defines the command line arguments used for dedicated connections. This
parameter works when
Type
RAC
Values
1 to 100 characters
Default
" " (null string)
Lists
RAC Only, Call Defaults,Dedicated Port
Managing Remote Access Concentrators Using Annex Manager
parameter. If you enter
prompt followed by the
Local>
, you cannot use any ISDN Primary Rate RAC security
file to authorize a connection to a host from the ISDN
is set to
CallDef_mode connect
Appendix A RAC Parameters
, the standard VMS
vci
prompt.
Username>
, , , or
rlogin Telnet tn3270
.
A-13