Bay Networks 5399 Manual page 240

Appendix A RAC Parameters
inactivity_timer
inet_addr
input_buffer_size
Managing Remote Access Concentrators Using Annex Manager
A-50
specifies the number of minutes that a port can remain inactive. If the timer
expires, the RAC terminates all sessions and resets the port. You can use
and
input_is_activity output_is_activity
from the port. If you set these parameters to
of activity. To reset a port regardless of any activity, enter a number of minutes
here, set
input_is_activity
Type Async
Values 0 to 255 minutes
Default 0 (timer disabled)
Lists Async Port, Idle Timer, Modem, Modem Internal
defines the RAC IP address. This 32-bit address contains four 8-bit fields
separated by periods. Each field contains a number ranging from 0 to 255 or a
hexadecimal number. The IP address always displays in decimal notation.
Type RAC
Values For each field: 0 to 255 or hexadecimal
Default n/a
Lists RAC Only, Basic RAC
provides the number of 256-byte blocks allocated to receive input characters for
a port.
Type Async
Values
1 to 255
Default
1
Lists
Async Port, Flow Control
to define activity as input to the port or output
disabled
and to
disabled
output_is_activity
, the timer runs independent
and set to
dialin
port_type
.