Bay Networks 5399 Manual page 82

Chapter 4 Setting Up RACs
Managing Remote Access Concentrators Using Annex Manager
4-8
• and
Broadcast On
broadcasts for security validation if the preferred security
servers are not available.
– activates the ACP security server, including security for
On
AppleTalk, CLI, and SLIP/PPP connections.
– deactivates security.
Off
If the selected RAC uses these security systems,
the window first appears. In this case, the
is activated. If you change the setting to
deactivates security but does not change the
setting.
DHCP Box
The box provides host information and broadcast message settings
DHCP
for RAC DHCP. It includes the following fields and buttons:
• contains the IP address of the DHCP server that
Preferred Host
the client attempts to use as the primary source for DHCP
services.
• contains the IP address of the DHCP server that
Alternate Host
the client attempts to use as a backup source for DHCP services
when the primary DHCP server does not respond to the backup
security server.
The DHCP fields are optional and may be 0.0.0.0. When enabled, the
client broadcasts DHCP messages.
• and
Broadcast On
broadcasts for a DHCP server if the preferred DHCP servers
are not available.
Click to activate the ACP security server.
On
• DHCP parameters include
and
pref_DHCP2addr
determine whether or not a RAC
Off
Off
determine whether or not a RAC
Off
DHCP_broadcast
.
is selected when
On
parameter
enable_security
, Annex Manager
parameter
enable_security
, ,
pref_DHCP1_addr