Bay Networks 5399 Manual page 71

4. Optionally click
Save Output ..
includes the default text directory. You can enter a file name in
the
Selection
window output box or
5. Click
Close
The Annex Discovery Window
The
Annex Discovery
process, and an output box to display information about RACs and other
devices. The window option button allows you to determine the level of
detail that appears in the output box and the push buttons allow you to
update your current RAC list or save the contents of the output box to a
file.
The
Annex Discovery
because the discovery process can identify only those network
devices that are visible to a specific search device at the current time.
The text fields control the identification process. You can complete the
following fields:
•
Search Device
device that stores information about nodes, devices and
addresses on your network. You can use a device name or IP
address here. The
Manager default community string to communicate with the
search device and with each device it queries.
•
SNMP Timeout
Manager waits for a response. You can enter a number of
seconds here. If you do not enter a value Annex Manager uses
the SNMP default.
•
SNMP Retries
tries to reach a RAC or other device on the network. You can
enter a number here. If you do not enter a value the discovery
process uses the SNMP default.
Managing Remote Access Concentrators Using Annex Manager
to save the screen output to a file.
Save Output ...
. displays the standard
field and click to store the contents of the
OK
to return to the window.
Cancel
to close the window.
window uses text fields to control the discovery
window may not find every RAC on a network
accepts the name or IP address of any network
Annex Discovery
specifies the length of time in seconds that Annex
controls the number of times that Annex Manager
Chapter 3 Determining RAC Status
window, which
File Selection
window uses the Annex
3-35