Bay Networks 5399 Manual page 111

Interface Options Box
The
Interface Options
boxes.
Telnet
• The
AppleTalk
AppleTalk hint used by the ISDN Primary Rate RAC. You can
enter an ID in decimal or hexadecimal notation.
• The
Rlogin/Telnet
and telnet connections. The
commands used when you select
box. You should include a host name or address here. You can
enter up to 100 characters.
Time Box
The box defines activity and controls inactivity timers:
Time
•
CLI Inactivity Timer
the ISDN Primary Rate RAC remains idle before disconnecting
a CLI session. Entering 0 (zero) disables the timer; entering
255 causes the RAC to disconnect as soon as it exits from its
last job. You can enter any number of minutes up to 255. Unlike
the call inactivity timer, this timer does not disconnect a CLI
session with active jobs.
•
Call Inactivity Timer
connection can remain inactive. If the timer expires, the RAC
terminates the call. Use the
buttons to define incoming call activity. If you do not use these
buttons, the timer runs independent of activity. You can enter
any number of minutes up to 255 minutes.
• The
Input Is Activity
the RAC resets the inactivity timer when it receives input
On
through an established call.
• The
Output Is Activity
click , the RAC resets the inactivity timer when it sends
On
output.
Managing Remote Access Concentrators Using Annex Manager
box displays information in the
box uses the
Node ID
Box allows you to specify arguments for rlogin
Argument
Rlogin
specifies the amount of time in minutes that
specifies the number of minutes that a
Input is Activity
button defines activity as input. If you click
button defines activity as output. If you
Chapter 4 Setting Up RACs
, and
AppleTalk
field. specifies the
Node ID
field contains the
or in the
Telnet Mode
and
Output Is Activity
Rlogin/
4-37