Bay Networks 5399 Manual page 281

server_name
service_limit
session_limit_RAC
session_limit_port
names the RAC in the LAT protocol. The name you enter should match the VMS
host node name used in the HIC configuration file. The Annex Manager default
value is followed by the physical ethernet address (for example,
LAT
).
LAT_080002BF0020
Type
RAC
Values
1 to 16 characters
Default LAT + physical ethernet address
Lists RAC Only, LAT
indicates the maximum number of services that a RAC can maintain in its local
service table. When the table is full, the RAC removes the service that is idle the
longest. If all services are busy and the table is full, the RAC discards a new
service.
Type RAC
Values 16 to 2048
Default 256
Lists RAC Only, LAT
specifies the maximum number of active sessions the RAC allows at one time.
Type RAC
Values 1 to 1152
Default 1152
Lists
RAC Only, LAT
specifies the maximum number of active sessions the RAC allows on a port at
one time. You can enter
Type
Async
Values
-1 to 16
Default
3s
Lists
Async Port, Basic Async Port,
Managing Remote Access Concentrators Using Annex Manager
to indicate that there is no maximum set.
-1
Appendix A RAC Parameters
A-91