Bay Networks 5399 Manual page 211

CallDef_location
lCallDef_long _ break
CallDef_map_to_upper
CallDef_map_to_lower
defines a location or description that displays at the CLI
Type
RAC
Values
0 to 16 characters
Default
" " (null string)
Lists
RAC Only, Basic Async Port, Sync Call Defaults
allows a RAC or an ISDN Primary Rate RAC to return a user to the CLI prompt
after receiving a break signal of more than two seconds. If you enter
the RAC passes the break to the local application.
Type
RAC
Values enabled or disabled
Default enabled
Lists RAC Defaults, Idle Timer
allows a RAC or an ISDN Primary Rate RAC to convert uppercase characters
received from a terminal using CLI into lowercase characters. This parameter is
used for older terminals that do not support lowercase characters.
Type RAC
Values enabled or disabled
Default disabled
Lists RAC Only, Call Defaults, Cmd Line Editing
allows a RAC or an ISDN Primary Rate RAC to convert lowercase characters
sent to a terminal using CLI into uppercase characters. This parameter is used
for older terminals that do not support lowercase characters.
Type Async
Values
enabled or disabled
Default
disabled
Lists
RAC Only, Call Defaults, Cmd Line Editing
Managing Remote Access Concentrators Using Annex Manager
Appendix A RAC Parameters
command.
who
disabled
,
A-21