Bay Networks 5399 Manual page 161

Set Window Work Area
When you click
Show Values
values for the parameters you selected in the
current values, mark the parameters you want to change, and enter new
values or options here.
Several components appear for each parameter:
• A check button ( ) precedes each parameter name. You need to
select this button in order to mark a parameter and select or
enter the values you want to change.
• Parameter names provide access to additional information. You
can highlight any parameter name or the corresponding value
field and click
parameter.
• Text fields or option buttons follow each parameter name. If the
RACs or ports/channels you selected have the same value, these
fields and buttons display that value. After selecting the check
button, you can enter new values or select new options here.
• The Dsp Diffs (Display Differences) button follows a text field
or an option button if the combination of RACs and ports or
channels you selected or the ports or channels you selected
from one RAC do not have the same parameter value. When the
button appears, text fields or option buttons remain blank.
You can leave the window displayed and use
parameter option that differs from your original selection. In this case,
clicking
Set
parameters.
Managing Remote Access Concentrators Using Annex Manager
Chapter 7
the work area in the
or to display a message about the
F1 Help
again in the window displays these new
Main
Configuring RAC Parameters
window can list
Set
window. You can verify
Main
again to select a
Set
7-13