Bay Networks 5399 Manual page 258

Appendix A RAC Parameters
option_key
output _ flow _ control
output_is_activity
Managing Remote Access Concentrators Using Annex Manager
A-68
enables AppleTalk-specific functions and parameters, the CLI
active RIP, dial-out routing, filtering, and IPX. These features are available
separately or in any combination. Each RAC requires a unique key value for the
features you choose. You must contact your supplier to obtain the key value.
Lists
RAC
Values
option key value from your supplier
Default n/a
Lists RAC Only, Basic RAC, AppleTalk, IPX
defines the method that a device uses to start or stop output from a RAC. You
can choose:
• to disable flow control.
none
• to designate flow control by recognizing xon and xoff
start/stop
characters.
• to indicate that flow control is delegated to a lower level
eia
(e.g., a parallel port).
Type Async
Values none, start/stop, eia
Default none
Lists Async Port, Printer Port, Flow Control, Modem
defines activity as output. If you enter
when it sends output from the port.
Type Async
Values enabled or disabled
Default enabled
Lists
Async Port, Dedicated Port, Idle Timer, Modem, Modem
Internal
, the RAC sets the inactivity timer
enabled
command,
tn3270