Bay Networks 5399 Manual page 250

Appendix A RAC Parameters
map_to_upper
max_chap_chall_
interval
max_modem_calls
max_vcli
Managing Remote Access Concentrators Using Annex Manager
A-60
allows a RAC to convert lowercase characters sent to a terminal using CLI into
uppercase characters. This parameter is used for older terminals that do not
support lowercase characters.
Type
Async
Values
enabled or disabled
Default
disabled
Lists Async Port, Command Line Editing
specifies the maximum value for the random CHAP re-challenge interval.
Type
RAC
Values
0 to 65535
Default
0 (Off)
Lists
RAC Only, Security
indicates the number of modem calls for which the RAC keeps accounting
information. You can use this parameter only for RA6100, Cabletron CSMIM-
T1, and Cabletron MODMIM products.
Type
RAC
Values 0 to 255
Default 255
Lists RAC Only, Basic RAC, Virtual CLI
determines the maximum number of virtual CLI connections the RAC can create
at a time. Entering
255
available memory of the RAC.
Type RAC
Values 0 to 255
Default 255
Lists RAC Only, Basic RAC, Virtual CLI
allows a number of connections limited only by the