Chapter 4
Setting Up RACs
Managing Remote Access Concentrators Using Annex Manager
4-16
10. Click
Edit Modem ...
The
window appears
Edit Modem
described in The Edit Modem Window on page 4-26.
11. Click
to make the changes.
OK
12. Click
to close the window.
Close
13. If you want to edit PPP or LAT parameters go to the next step.
Otherwise skip to step
14. On the
Edit Async Ports
The
Edit Async Ports (continued)
window is described in The Edit Async Ports (continued) Window
on page 4-24.
15. Change the parameters in the
as desired.
16. Click
to make the changes and return to the
OK
window or
Cancel
changes.
17. Optionally click
Restore
(If you have already clicked Apply you cannot do this.)
18. Click
.
Apply
Annex Manager sets the new values you entered.
19. Click
to close the window.
Close
in the
box.
Modem
(Figure
4-8). This window is
16.
window, click
More
window appears
Edit Async Ports (continued)
to close the window without making the
to reset all fields to the previous values.
.
(Figure
4-7). This
window
Edit Async Ports