control_lines
data_bits
daylight_savings
dedicated_address
defines the type of hardware control lines used on this port. You can enter:
•
to allow flow and modem control.
both
•
flow_control
•
modem_control
DSR handshaking.
•
to disable flow and modem control.
none
Type
Async
Values
both, flow_control, modem_control, none
Default
none
Lists
Async Port, Flow Control, Modem, Modem Internal
defines the number of data bits in a character. This value does not include the
start, stop, or parity bits.
Type
RAC
Values
5, 6, 7, or 8
Default
8
Lists
RAC Only, Basic Async Port, Modem
allows the RAC to adjust for daylight savings time in your geographic location.
Type
RAC
Values
us, australian, british, canadian, east_european,
mid_european, west_european, none
Default
us
Lists
RAC only
defines one host and one TCP port to which this port can connect. To use this
parameter, set the
Mode
Type
Async
Values
IP address
Default
0.0.0.0
Lists
Async Port, Dedicated_Port
Managing Remote Access Concentrators Using Annex Manager
to allow flow control (RTS/CTS) only.
to allow modem control using only DTR/DCD/
parameter to
dedicated
Appendix A
RAC Parameters
.
A-41