Bay Networks 5399 Manual page 290

Appendix A RAC Parameters
time_server_addr
timezone_minuteswest
tmux_delay
Managing Remote Access Concentrators Using Annex Manager
A-100
lists the IP address that a RAC queries for time service. You can enter:
• A loopback address (127.0.0.1) to disable time service queries.
• A host address to send queries to a specific host.
• A broadcast address to send queries to a specific network or
networks instead of sending a general broadcast to all networks.
• to direct the RAC to query the boot host.
0.0.0.0
Type RAC
Values loopback address, host address, broadcast address, 0.0.0.0
Default
0.0.0.0
Lists
RAC Only, Time of Day
defines the time zone in which the RAC resides. You can enter a positive number
of minutes for time zones west of Greenwich Mean Time (GMT) or a negative
number for time zones east of GMT. For example, you would enter
Eastern Standard Time, which is five hours west of GMT, or -60 for Paris, which
is one hour east of GMT.
Type
RAC
Values
positive or negative number of minutes
Default
300
Lists
RAC Only, Time of Day
provides the maximum number of milliseconds during which small packets can
accumulate to form larger packets. When the time expires, the multiplexed packet
is sent. Entering sets this parameter to 20 (the Annex Manager default value).
0
Type
RAC
Values
0 through 255
Default
20
Lists RAC Only, TMux
for U.S.
300