Bay Networks 5399 Manual page 283

slip_no_icmp
slip_ppp_security
slip_subnet_mask
slip_tos
discards ICMP packets directed to the SLIP link. This parameter allows the RAC
to reduce unnecessary traffic and messages over the SLIP link.
Type
Async
Values
enabled or disabled
Default
disabled
Lists
Async Port, SLIP
controls dial-up SLIP/PPP access. When
set to , ports configured for SLIP and PPP use the ACP security server.
enabled
The RAC determines whether CLI users are authorized to execute SLIP or PPP
commands.
Type Async
Values enabled or disabled
Default disabled
Lists Async Port, PPP, SLIP, Security
contains the RAC IP subnet mask for a SLIP interface. The subnet mask defines
which portion of the IP address is the network, subnet, and host. The parameter
default is based on the network portion of the RAC IP address. Setting this
parameter incorrectly can cause routing problems.
Type Async
Values IP address
Default
0.0.0.0
Lists
Async Port, SLIP
allows a RAC to send interactive traffic (such as
sessions) before it sends other traffic. This parameter provides a type-of-service
based SLIP queuing.
Type
Async
Values
enabled or disabled
Default
disabled
Lists
Async Port, SLIP
Managing Remote Access Concentrators Using Annex Manager
Appendix A RAC Parameters
and
enable_security slip_ppp_security
, , and
Telnet rlogin
are
control
ftp
A-93