Bay Networks 5399 Manual page 233

default_image_name
default_zone_list
demand_dial
DHCP_broadcast
contains the name of the image file that is loaded by default when the RAC is
booted.
Type
RAC
Values
0 to 100 characters
Default
" " (null string)
Lists
RAC Only, Basic RAC
contains the zone list that is sent to AppleTalk clients in case of an ACP failure.
You must use spaces to separate zone names (e.g.,
escape embedded spaces within a zone name, use the backslash (\). If you do not
set this parameter, the RAC provides the network zone list.
Type RAC
Values 1 to 100 characters
Default " " (null string)
Lists RAC Only, AppleTalk
allows a port to use demand dialing. You cannot use this parameter unless the
parameter enables demand dialing.
option_key
Type Async
Values enabled or disabled
Default disabled
Lists Async Port, PPP, SLIP
determines whether or not a RAC broadcasts for DHCP services if the preferred
DHCP servers are not available.
Type RAC
Values
enabled or disabled
Default
disabled
Lists
RAC Only
Managing Remote Access Concentrators Using Annex Manager
Appendix A RAC Parameters
). To
general engineering lab
A-43