Bay Networks 5399 Manual page 222

Appendix A RAC Parameters
CallDef_redisplay_line
CallDef_reset_idle_
time_on
CallDef_resolve_
protocol
CallDef_rs232_async_
data_bits
Managing Remote Access Concentrators Using Annex Manager
A-32
defines the reprint line character for CLI users.
Type
RAC
Values
+ any character
Ctrl
Default
+ (displays as ^R)
Ctrl R
Lists
RAC Only, Cmd Line Editing, Call Defaults
defines whether input or output resets the idle timer. The idle time is the time
lapse between activity and inactivity at the device. This parameter works with
the command.
who
Type
RAC
Values
input or output
Default
input
Lists
RAC Only, Idle Timer, Call Defaults
defines the default host protocol that establishes a connection when the command
does not specify a protocol. If you enter
first; if that fails, it attempts to establish a Telnet connection.
Type RAC
Values connect, Telnet, any
Default connect
Lists RAC Only, Call Defaults
defines the number of data bits in a character. This value does not include the
start, stop, or parity bits.
Type RAC
Values 5, 6, 7, or 8
Default 8
Lists
RAC Only, Basic Async Port, Modem, Modem Internal,
Call Defaults
the system attempts a LAT (connect)
any,