Bay Networks 5399 Manual page 263

• sets
Dialinout
(or the highest speed that the hardware supports),
,
both
input_flow_control
,
disabled
bidirectional_modem
.
port
• sets
Dialout
highest speed that the hardware supports),
input_flow_control
,
disabled
bidirectional_modem
.
network
•
Autodetect
,
enabled speed
supports),
output_flow_control
, and
enabled
• sets
Autoadapt
,
enabled speed
supports),
output_flow_control
, and
disabled
• sets
Ipx mode
(or the highest speed that the hardware supports),
115200
control_lines
,
eia
need_dsr
broadcast_direction
You can set any parameter included in
For example, you can choose
parameter to
following way:
Each time you use a command that reads the
the RAC tries to match the individual parameter values to existing
port_modem_config
Manager displays the appropriate value for
changed one or more parameter values so that they do not match
port_modem_config
appears only under this circumstance. You cannot choose
Unknown
unknown for
Managing Remote Access Concentrators Using Annex Manager
to
mode adaptive, port_type
to ,
eia
output_flow_control
to
enabled
to
mode slave, port_type
to ,
eia
output_flow_control
to
enabled
sets to
mode auto_detect
to (or the highest speed that the hardware
115200
to ,
both
control_lines input_flow_control
to , to
eia
need_dsr
to
port
broadcast_direction
to ,
mode auto_adapt
to (or the highest speed that the hardware
115200
to ,
both
control_lines input_flow_control
to , to
eia
need_dsr
to
port
broadcast_direction
to , to
ipx port_type dialin
to ,
both
input_flow_control
to ,
enabled
bidirectional_modem
to .
port
dialin
. This change affects
57600
settings. If parameter values match, Annex
values, Annex Manager displays
.
port_modem_config
Appendix A RAC Parameters
to , to
dialin speed 115200
control_lines
to ,
eia
need_dsr
, and
broadcast_direction
to , to
dialin speed 115200
to
control_lines
to , to
eia
need_dsr
, and
broadcast_direction
, to ,
port_type dialin autobaud
to ,
eia
,
enabled
bidirectional_modem
.
to ,
port_type dialin autobaud
to ,
eia
,
enabled
bidirectional_modem
.
, to ,
autobaud enabled
to ,
eia
output_flow_control
to , and
disabled
separately.
port_modem_config
and then change the
speed
port_modem_config
port_modem_config
port_modem_config
unknown
to
to
to
(or the
,
both
to
to
to
to
to
to
speed
to
in the
value,
. If you
.
A-73