Bay Networks 5399 Manual page 192

Appendix A RAC Parameters
a_router
acp_key
alarmsyslog
allow_broadcast
Managing Remote Access Concentrators Using Annex Manager
A-2
defines the Ethernet address that the RAC attempts to use as the AppleTalk router
address. If the router does not respond, the RAC listens for an RTMP packet and
uses the address in the packet as the new router address. You can enter
the RAC to find the router.
Type
RAC
Values
0 to 253
Default 00-00-00-00-00-00
Lists RAC Only, AppleTalk
defines the encryption key used to exchange messages between the RAC and the
security server. You can use this parameter only when the
parameter is set to
enabled
maintains the encryption key for each RAC in the
reasons, Annex Manager displays only
The RAC and the security server can communicate only when the
value of this parameter is the same as the value of the RAC in the
security server
Type RAC
Values 16 characters
Default unset
Lists RAC Only, Security
allows the RAC to generate a syslog at the warning level when it detects any
alarm event. To use this feature you must enable syslogging on a RAC using the
,
syslog_facility syslog_host
Type WAN Module
Values
enabled or disabled
Default
enabled
Lists
DS1 Line, T1_DS1
permits an asynchronous port to receive administrative broadcast messages
generated by the and
Boot
Type
Async
Values
enabled or disabled
Default
disabled
Lists
Async Port, Basic Async Port
and a security server is defined. The security server
or
set unset
file.
acp_keys
, and parameters.
syslog_mask
commands.
Broadcast
to direct
0
enable_security
file. For security
acp_keys
for the value of this parameter.