Bay Networks 5399 Manual page 206

Appendix A RAC Parameters
CallDef_erase_word
CallDef_forward_key
CallDef_forwarding_
count
Managing Remote Access Concentrators Using Annex Manager
A-16
uses a control character sequence to define the CLI word erase character.
Type
RAC
Values
+ any character
Ctrl
Default
+
(displays as ^W)
Ctrl W
Lists RAC Only, Call Defaults, Cmd Line Editing
defines the character sequence that opens the next higher-numbered session
established through a call. Bay Networks recommends that you use a sequence
with + a character. The key displays as ^. If you use more than one letter
Ctrl
or number, Annex Manager separates characters with a slash (/). For example,
+ + , displays as
a b
Ctrl
Type
RAC
Values
0 to 16 characters
Default
" " (null string)
Lists
RAC Only, Call Defaults, vci_interface
controls ISDN Primary Rate RAC behavior for received characters. If you enter
a number other than , the RAC does not forward characters until it receives the
0
number of characters you entered. If you enter
. If you use
CallDef_forwarding_timer
CallDef_forwarding_timer
Setting
CallDef_forwarding_count
have a severe effect on the network when heavy serial input occurs.
Type RAC
Values 0 to 255
Default 0
Lists RAC Only, Call Defaults, Idle Timer
.
^a/b
CallDef_forwarding_count
parameters, the RAC uses the value that occurs first.
to or
1
CallDef_forwarding_timer
, the RAC uses values in
0
and
to can
0