Bay Networks 5399 Manual page 270

Appendix A RAC Parameters
pref_secure1_host
pri_analog_encoding
pri_block_in_calls
pri_block_out_calls
Managing Remote Access Concentrators Using Annex Manager
A-80
contains the IP address of the security server to which the RAC first sends security
requests. This parameter works only if the
.
enabled
Type
RAC
Values
IP address
Default
0.0.0.0
Lists RAC Only, Security
defines the coding type of an incoming analog (modem) call. If you choose
the ISDN Primary Rate RAC sets the coding type to
(Europe).
Type RAC
Values auto, mu_law, a_law
Default auto
Lists DS1 Line, PRI_Line
facilitates ISDN Primary Rate RAC shutdown by automating incoming call
attrition. If you choose
incoming calls are blocked.
Type
RAC
Values
enabled or disabled
Default
disable
Lists
DS1 Line, PRI_Line
facilitates ISDN Primary Rate RAC shutdown by automating outgoing call
attrition. If you choose
outgoing calls are blocked.
Type RAC
Values enabled or disabled
Default disable
Lists DS1 Line, PRI_Line
enable_security
, existing calls are allowed to terminate but new
enabled
, existing calls are allowed to terminate but new
enabled
parameter is set to
auto
(US) or
mu_law a_law
,