Bay Networks 5399 Manual page 166

Chapter 7 Configuring RAC Parameters
Managing Remote Access Concentrators Using Annex Manager
7-18
The
Comparison Output
values between the RACs and scripts you select. If parameter
values differ, or if a parameter name does not exist, the box displays
the parameter information. The
depends on the option you choose.
formats.
Table 7-1. Comparison Output Box Information
If values differ and The Output Box includes:
you select:
RAC vs. RAC
Parameter name followed by each RAC
name, port number (if necessary), and the
parameter value.
RAC vs. Script Parameter name followed by the RAC
name and value, and the file name and
value.
Script vs. Script
Parameter name followed by each script
name. Parameter values appear if a
parameter exists in both scripts but values
are different. If a parameter exists in one
script but not in the other, the box lists the
parameter name and explains which script
stores the parameter.
The process considers the wild card indicator (an asterisk
Compare
(*)) as a special port number. If you select
scripts have the same parameter but one uses a wild card, the
parameter appears in the output box.
4. Choose a RAC from each
If your list has one RAC, you do not need to select it. If you want
to compare two ports on the same RAC, select the same RAC in
both list boxes.
5. Select one port type and a port number for each Annex List.
If you selected the
type that matches the parameters you selected. For all other
Compare Options
box reports the differences in parameter
Comparison Output
Table 7-1
Annex List box that displays.
option, you must select a port
Annex vs. Annex
, you can select only the appropriate port type. If
box format
describes these
and the two
Script vs. Script