Bay Networks 5399 Manual page 170

Chapter 7 Configuring RAC Parameters
Managing Remote Access Concentrators Using Annex Manager
7-22
If you selected an option other than
skip this step and go to step 6.
The port type selections are:
•
Main Window Params
type for the parameter group or list you chose. For
example, if you use a group that includes asynchronous
ports and you select printer ports here, the copy
command displays a warning and does not use all
asynchronous parameters.
•
Annex Only Params
fields. You cannot change port parameters.
•
Async Port(s)
port number in the field. For
automatically. You cannot change this value.
•
Async Port Params
WAN Module Params,
displays automatically. You cannot change the port
type button.
The two port number fields list the ports involved in the copy
process. You can enter one port number in the left-hand field for
the RAC from which you are copying values, and one or more
numbers (or a range of numbers) in the right-hand field for the RAC
to which you are copying values. To enter specific ports, separate
port numbers with commas or indicate a range of numbers using
dashes. For example, you can enter 1, 3, 8 to specify three ports,
or 1-3, 8 to specify ports 1 through 3 and port 8.
6. Enter a port number in the field next to the port type button if
you selected Main Window Params
Async Port Params
Port Params .
If you choose
Main Window
parameters you selected.
, you can select the appropriate port
, you cannot use the port button or
, , and
Printer Port(s) WAN Module #,
Enet
,
Printer Port Params
the corresponding port option
that require port information,
,
Printer Port Params, WAN Module Params
, this port type must match those in the
,
Main Window Params
enter one
port(s), 1 displays
, , or
Enet Params
, or
Enet