Bay Networks 5399 Manual page 293

tni_ones_density
toggle_output
vci_autobaud
disables the T1 engine built-in-ones density monitor. When you select
this monitor provides the network with the correct number of pulses. You should
select enabled here when you set the
Type T1 DS1
Values enabled or disabled
Default
disabled
Lists
DS1 Line
defines the character that flushes the output buffer for CLI users.
Type
Async
Values
+ any character
Ctrl
Default
+ O (displays as ^O)
Ctrl
Lists Async Port, Command Line Editing
indicates whether the RAC automatically detects line speed when a connection
is opened and whether it sets matching terminal port characteristics on the next
login. This parameter works only when the DECServer command interface is
configured (i.e., when
Annex Interface for VMS Environments Administrator's Guide.
Type Async
Values enabled or disabled
Default disabled
Lists Async Port
Managing Remote Access Concentrators Using Annex Manager
tni_line_code
is set to ). For more information, refer to the
vci
cli_interface
Appendix A RAC Parameters
enabled
parameter to .
ami
,
A-103