Bay Networks 5399 Manual page 210

Appendix A RAC Parameters
CallDef_latb_enable
CallDef_line_erase
CallDef_local_address
Managing Remote Access Concentrators Using Annex Manager
A-20
allows a RAC or an ISDN Primary Rate RAC to decode the LAT host data-b
packets, which change asynchronous call parameters. Refer to the documentation
of your LAT host.
If you enter
enabled
requesting that flow control (XON/XOFF) be turned off, the RAC
turns off flow control and passes XON/XOFF characters to the host.
This scenario can adversely affect XON/XOFF and the terminal
cursor keys.
Type
RAC
Values
enabled or disabled
Default disabled
Lists RAC Only, Call Defaults, LAT
allows a RAC or an ISDN Primary Rate RAC using CLI to echo line erase for a
video terminal. If you choose
and moves the cursor back to the beginning of the line. If you choose
it echoes the line erase character for hard-copy terminals, making the deleted
line visible and positioning the print head at the beginning of the next line.
Type RAC
Values enabled or disabled
Default enabled
Lists RAC Only, Call Defaults, Cmd Line Editing
defines the IP address for the connection on the ISDN Primary Rate RAC side
of the link. This IP address is used only when
.
autodetect
Type
RAC
Values
IP address
Default
0.0.0.0
Lists
RAC Only, PPP, SLIP, Sync Call Defaults
and the LAT host sends a data-b slot message
, the RAC erases all characters on the line
enabled
CallDef_mode
,
disabled
is set to , or
slip ppp,