Bay Networks 5399 Manual page 294

Appendix A RAC Parameters
vci_login_port_
password
vci_login_timeout
vcli_groups
vcli_password
vcli_security
Managing Remote Access Concentrators Using Annex Manager
A-104
enables the port password when the DECServer command interface is configured
(i.e., when is set to
cli_interface
Interface for VMS Environments Administrator's Guide.
Type
Async
Values
enabled or disabled
Default
disabled
Lists Async Port
enables a login timer when the DECServer command interface is configured (i.e.,
when is set to
cli_interface
for VMS Environments Administrator's Guide.
Type Async
Values enabled or disabled
Default disabled
Lists Async Port
specifies which remote group code is assigned to virtual CLI users. All virtual
CLI users have the same group code. You can enter
to disable all groups, a series of numbers separated by commas (e.g.,
a range of numbers separated by dashes (e.g.,
Type RAC
Values all, none, numbers between 0 and 255
Default
none
Lists
RAC Only, LAT
defines a password required for virtual CLI connections to the RAC and as a
backup to host-based security. This parameter serves as host-based security
backup: the RAC requests a password on a virtual CLI connection if the security
server does not respond. For local password protection, you can set
to , choose
enabled disabled
Type
RAC
Values
0 to 15 characters
Default
unset
Lists
RAC Only, Security, Virtual CLI
controls user validation on virtual CLI connections to and from a RAC. If you
choose , the RAC enables connection security for all virtual CLI
enabled
). For more information, refer to the Annex
vci
). For more information, refer to the Annex Interface
vci
1, 5, 200-255
for , and enter a password here.
vcli_security
to enable all groups,
all none
, ,
1 5 7
).
enable_security
), or