Bay Networks 5399 Manual page 104

Chapter 4 Setting Up RACs
Managing Remote Access Concentrators Using Annex Manager
4-30
The Edit WAN Module Window
The window allows you to set WAN Interface parameters.
Edit WAN Module
The window displays information in the
box, and the
Provisioning
WAN Parameters Box
The box displays uses the following option buttons:
WAN Parameters
• defines the kind of switch the RAC uses. The value
Switch Type
you choose here depends on the switch provided by your
telephone company. You can select:
• Default - see
• Other for a switch not listed
• US/N.American(Chan_T1)
• Singapore(E1_ISDN)
• NI-2(T1_ISDN)
• DMS-100(T1_ISDN)
• 5ESS(T1_ISDN)
• ETS1(E1_ISDN)
• Australia(E1_PRI)
• Japan_NTT
• ETS1(w/o CRC4)E1_ISDN
• HongKong(Chan_T1)
• Taiwan(T1/R1)
• CCITT(E1/R2)
• 4ESS(T1_ISDN)
• Brazil(E1/R2)
• Korean(E1/R2)
• Sweden(E1/P7)
WAN Parameters
box.
ANI Provisioning
Table 4-1 for the default switch type
box, the
DNIS